MiTeGen为广大客户提供：Nanosoft系列产品，Nanosoft的工具旨在使您的冷冻电镜工作更加高效和富有成效。其中部分工具专门适配FEI/Thermo Fisher Scientific Vitrobot使用。

Clipping Tool Set

M-CEM-NS-CLT-Set

Nanosoft Clipping Tools与赛默飞版本相同，装载有C-Clips，并且与赛默飞的clipping station兼容

Clipping Tool套装包括：

grid clipping tools，货号；M-CEM-NS-CLT01（4个）

Nanosoft Grid Clipping Tools is loaded with c-clips and clips grids the same way as the Thermo Fisher version, and is compatible with the Thermo Fisher clipping station. The difference is that with the Nanosoft version, instead of ejecting the C-clip by pressing a long plastic handle like with the Thermo version, you press on the Nanosoft tool with a pair of tweezers.

The Nanosoft version has the advantage of a compact design so that when they are placed in LN2 in the clipping station to be cooled down, the entire body is deep enough inside the station that they are untouched by any frost from environmental moisture, even when left in the station at cryogenic temperature for long periods of time. This means you can pre-load as many of the Nanosoft tools with C-clips as you would like, cool them all down at the same time, and then clip all your grids at one time without with little consideration for ice contamination – no need to warm, re-load and re-cool clipping tools.

C-clip bottoming tool，货号；M-CEM-NS-CCBT01（1个）

The Nanosoft C-clip Bottoming Tool provides an easier and more efficient way to “bottom” the C-clip at the tip of the barrel of a clipping tool prior to clipping. After pressing the c-clip into the barrel of the tool, instead of pressing the tip of the barrel against the tabletop or a pair of tweezers to push the c-clip to the tip of the barrel (by pressing the plunger), you place the barrel into the Bottoming Tool and press the plunger of the tool to bottom the c-clip.

The cylinder of the Bottoming Tool ensures that the barrel of the clipping tool is straight, so upon pressing of the plunger to push the c-clip to the tip you are much less likely to “mis-bottom” the c-clip. Often when pressing the tip against the table top or another flat surface, you are not able to hold the barrel exactly straight again the surface and you the c-clip can fly out of the tool and is lost. The Nanosoft Bottoming Tool provides an easy way to ensure you don’t mis-bottom c-clips anymore.

clipping tool rack，货号；M-CEM-NS-CCBT01（1个）

更多产品信息，请联系上海金畔生物科技有限公司